Swagelok Tubing System Training Program for Chemical and Refining

The Swagelok® Tubing System Training Program for Chemical and Refining (SWAGE-TSTP-CR) is designed to address the small-bore tubing training needs for midstream and downstream applications. It covers tube fitting installation, inspection, tube bending, and other relevant topics.

Description

This hands-on training is ideal for installers, engineers, designers, QC/QA
inspectors, and others responsible for designing, installing, maintaining, and/or
inspecting tubing systems in midstream and downstream chemical and refining applications. 

The training provides theoretical and practical experience through a combination of explanation, demonstration, hands-on exercises, and validation. All attendees receive a Swagelok® Tube Fitter’s Installer’s Guide, Hand Tube Bender manual, and gap inspection gauge for 1/4-inch (6mm), 3/8-inch, and 1/2-inch (12 mm) tube fitting sizes.


The program addresses common concerns that are root causes for project overruns, including:

• Leaks on tube fittings and threaded connections due to incorrect installation 
• Improper tube preparation
• Intermix and Interchange
• Tube blowout
• Contamination
• Thread galling
• Surface finish damage
• Vibration issues
• Poor tubing layout
• Improperly supported tubing
• Bend defects and bend radius interference

Similar courses

Swagelok® Essentials training courses provide critical skills for developing, building, and maintaining dependable fluid systems. Taught by Swagelok-certified trainers at locations and times convenient to you, these courses provide the foundational knowledge and techniques needed to build and operate high-performing fluid systems.

More Information

This intensive Swagelok Orbital Welding Certification course is designed for technicians, engineers, and professionals seeking to enhance their skills and knowledge in orbital welding. The course provides comprehensive training on the principles, techniques, and applications of orbital welding, with a strong emphasis on achieving precision, consistency, and high-quality welds in a variety of industrial settings.

More Information

The seminar emphasizes choosing correct tubing and fittings for the site, proper handling, preparing, and installing components to specification.

More Information

The "Tube Bending Essentials" course teaches participants to use the Swagelok Hand Tube Bender to create accurate 45°, 90°, and 180° bends. The training includes practical exercises for measuring and bending tubing.

More Information

This course will help you understand and identify key design characteristics of medium-pressure Swagelok FK series fittings and learn how to prepare and install them. It covers the basic criteria, variables, and considerations relevant to safely and effectively using FK tube fittings in medium pressure gas and liquid systems.

More Information

The Swagelok® Tubing System Training Program Hydrogen is a globally standardized one and a half day workshop designed to address small bore tubing training needs for Hydrogen applications. It covers tube fitting installation, inspection, tube bending, and other relevant topics. An additional half-day workshop is available for higher pressure applications (FK + C&T).

More Information

Swagelok VCR® & VCO® Essentials Training provides an in-depth understanding of critical high-purity connections used in semiconductor, pharmaceutical, and other ultra-high purity systems. Learn proper installation, troubleshooting, and best practices to ensure leak-tight, high-performance connections.

More Information